[Icom] IC-706MKIIG on PACTOR

Sun, 16 Jun 2002 22:32:04 -0700

I'm not familiar with the 706 series but it just occurred to me that the=20
bandwidth of the new unit might be such that you're unable to send both=20
tones involved with Pactor. Just a thought.

73 - Larry W=D8NFU

At 05:17 PM 6/16/02 -1000, you wrote:
>Thanks to all who tried to help on my problem. All tones sound normal and
>the software I am using is PC PACRATT II. Everything does work properly
>with an IC 706 MKII but WILL NOT WORK with my 706 MKII G. I am almost
>bald by now!
>
>73, Peter, NH6VB. ALOHA.
>
>On Sun, 16 Jun 2002 20:06:57 -0600 "Dave Jeffries" <[email protected]>
>writes:
> > Hi Peter,
> >
> > Are you set up to be able to monitor your receive audio while in
> > circuit
> > ??
> > Does it "sound" proper for PACTOR  ?   Is there sufficient level for
> > the
> > TNC ??
> >
> > Just throwing ideas,  I'm not set up for PACTOR myself --yet.
> > But it seems that if you're transmitting OK (your unproto remark)
> > the
> > only thing left is the receiver settings.
> >
> > Good Luck.
> >
> > Dave J          N0GMP
> > [email protected]
> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> >
> > ----- Original Message -----
> > From: "Peter Scheller" <[email protected]>
> > To: <[email protected]>
> > Sent: Sunday, June 16, 2002 19:29
> > Subject: [Icom] IC-706MKIIG on PACTOR
> >
> >
> > Hi Gang,
> > I am still chasing my tail trying to get my 706MKIIG to operate on
> > PACTOR
> > properly. So far I eliminated wiring, TNC, software and computer.
> > The
> > fault seems to be in the radio. The problem is that although
> > everything
> > is fine in unproto I cannot connect via F-4, calling a station or
> > be
> > called.
> >
> > Any thoughts on this subject ?
> >
> > 73, Peter, NH6VB. ALOHA.
> >
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today!  For your FREE software, visit:
> > http://dl.www.juno.com/get/web/.
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>________________________________________________________________
>GET INTERNET ACCESS FROM JUNO!
>Juno offers FREE or PREMIUM Internet access for less!
>Join Juno today!  For your FREE software, visit:
>http://dl.www.juno.com/get/web/.
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom FAQ: http://www.qsl.net/icom/