[Icom] MC60A to a IC275H...does anyone know

Tue, 11 Jun 2002 19:36:15 -0700

The web-site is:

         http://www.execulink.com/~dstalk/765/765-html/index.html

Which contains a lot of good data about the IC-765.

Larry

At 06:19 PM 6/11/02 -0700, you wrote:
>Hello Steve,
>A while back i saw an article on the internet for a ham using an MC-60A with
>an ICOM transceiver.  I think i used Google to search for MC-60A and found
>it.
>
>It should work if you re-wire the plug to match the jack on the ICOM ..... and
>....
>you make a modification to allow the up down switches to work.  The A version
>of the MC-60 is pre-amplified and can use batteries, or you can wire it to
>take
>+ VDC from the ICOM mike connector if available on your rig.  Years ago i used
>to
>us an MC-50 on an ICOM IC-490A for satellite work, it worked extremely well.
>
>If you need further details, send me an e-mail and i'll give you more
>information
>off of the list.
>73 - Paul
>
>
>Steve Jones wrote:
>
> > if this can be done as I think they are both 8 pin input and connectors. I
> > don't have the IC275 yet nor any info so just wondering, 73, Steve
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom FAQ: http://www.qsl.net/icom/