[Icom] No Audio on 756 Pro

[John Brautlacht]

IIRC the squelch shouldn't stop the S meter from deflecting.

John KD7KBL
Bothell, WA




________________________________________
All outgoing emails from this computer are scanned by Norton Antivirus 2002.
----- Original Message -----
From: "George, W5YR" <w5yr@att.net>
To: <icom@mailman.qth.net>
Sent: Sunday, June 09, 2002 10:48 PM
Subject: Re: [Icom] No Audio on 756 Pro


> Have you advanced the RF/SQUELCH knob too far CW so that the aquelch has
> the audio off?
>
> Check your menu for how the knob is set up.
>
> HAving the squelch on when you are unaware of it is a common cockpit error
> that results in no audio on receive.
>
> 73/72/oo, George W5YR - the Yellow Rose of Texas
> Fairview, TX 30 mi NE of Dallas in Collin county EM13qe
> Amateur Radio W5YR, in the 56th year and it just keeps getting better!
> QRP-L 1373 NETXQRP 6 SOC 262 COG 8 FPQRP 404 TEN-X 11771 I-LINK 11735
> Icom IC-756PRO #02121  Kachina 505 DSP  #91900556  Icom IC-765 #02437
>
>
> Roger Doran wrote:
> >
> > My 756 suddenly went completely quiet. Everything works in xmit, but no
> > audio in receive- it shows up normally on the scope, but no readings on
> > the analog or digital s-meter. PreAmp makes no change. There is only a
> > slight hiss. Yes I've checked the RF gain et al and reset the cpu to no
> > avail. Any experience out there? TIA
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom FAQ: http://www.qsl.net/icom/