[Icom] Icom 756-Pro II audio/mic input alternatives

[anthony costa]

yes george understood,but iv'e heard theese guy's on 14178 with s-9 and less
with there 1500 watts and they are difficult to hear.so 1500 watts and there
beam's dont cut it unless band condition's cooperate.if they narrowed there
bandwidth and used say
3 to 5 db of proccesing they would be armchair copy.I have a mosley ta-33
classic up on 50 ft rohn 25g and a al-82 1500 watts but im considering
selling my eq and pre-amp.it's a job to play radio.constantly asking for
audio check's and messing with the eq.and then i shout a dx station that
say's im too bassy.that's because im s-8 or 9.maybe less.ssb does the best
at 2.3 to 2.6 width.

tony c
----- Original Message -----
From: "George, W5YR" <w5yr@att.net>
To: <icom@mailman.qth.net>
Sent: Sunday, June 02, 2002 8:28 PM
Subject: Re: [Icom] Icom 756-Pro II audio/mic input alternatives


> Tony, if you listen around 14178 enough you will soon learn that the big
> guns are running the "legal limit" whatever that means. Several times, one
> or more of the regulars has said that no signal under S9 can be analyzed
> for sound quality and that a signal must be at least S9+20 dB in order to
> be heard properly for a critique.
>
> We little pistols with the 100 watts and wires just don't make it in that
> league, but we can still have clean signals and enjoy ham radio.
>
> 73/72/oo, George W5YR - the Yellow Rose of Texas
> Fairview, TX 30 mi NE of Dallas in Collin county EM13qe
> Amateur Radio W5YR, in the 56th year and it just keeps getting better!
> QRP-L 1373 NETXQRP 6 SOC 262 COG 8 FPQRP 404 TEN-X 11771 I-LINK 11735
> Icom IC-756PRO #02121  Kachina 505 DSP  #91900556  Icom IC-765 #02437
>
>
> anthony costa wrote:
> >
> > I was into the ssb hi fi audio and still am to a certain degree but if
im
> > not s-9 or above the station at the other end has a hard time hearing
> > me.heck im putting out 110 watts.Now when i go directly into the rig
with
> > the hand mic with the bandwidth narrowed down to 2.4k they NOW hear me
> > loud.so my question is how do you aquire smooth rich audio with nice
> > punch.can i do this running out to 3.0?i was thinking 3.0 with the IHY
box
> > set up for more treble and a little less bass.Or should i go down to 2.6
or
> > lower.my main goal is to be heard loud not muddy.any help would be
> > appreciated.adam? matt?youse guy's.....................
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom FAQ: http://www.qsl.net/icom/
>