[Icom] PW1 VL1000 ACOM 2000

Sat, 27 Jul 2002 20:17:18 -0400

id like to get more info on this amp.price,picture..........
----- Original Message -----
From: "Bruce Marton" <[email protected]>
To: <[email protected]>
Sent: Thursday, July 25, 2002 6:23 PM
Subject: Re: [Icom] PW1 VL1000 ACOM 2000


> Acom 2000 has it over the others, hands down.
> Lower distortion, higher output (up to 2.4KW) fully automatic, fully
> protected and much cheaper finals to replace if needed.
> Makes a 500 watt and up, transceiver.  12 watts drive gets me around 500
to
> 600 watts output.  75 to 80 watts gets you up around 2 KW plus.  I run my
> drive down at 12 watts most of the time and around 50 watts if needed to
do
> 1.5 KW.  Keep everything fairly cool.  The noise level from the fans are
> almost zero in the Acom.  This is your best value in a full auto tune
> operation.
> Bruce K1XR
>
>
>
> ----- Original Message -----
> From: <[email protected]>
> To: <[email protected]>
> Sent: Thursday, July 25, 2002 2:37 PM
> Subject: [Icom] PW1 VL1000 ACOM 2000
>
>
> > is any one can let me know what the best linear that as well have good
atu
> in
> > it
> > and working well is it the ICOM PW1 VERTEX VL1000 OR ACOM 2000 ?
> > many thanks for any information
> > best 73 DL9FCC PAIM
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>