[Icom] pro proll and vl1000 quadra linear

Sun, 21 Jul 2002 18:36:32 -0700

Hi Matt,

Many thanks for the referral! The interface information is here:

http://www.qsl.net/ab4oj/quadra/1stimpr.html

I originally chose the Quadra over the PW-1, as at the time of purchase
(December 1998) the PW-1 was encountering severe "teething troubles". The
PW-1 has since settled down, and is now an excellent alternative to the
Quadra - but the same limitations apply as described above for the Quadra.
Unlike the Quadra, though, the PW-1 will automatically track band selection
on an Icom exciter, and does not require de-rating to 500W on 6m.

80W of drive will normally drive the Quadra to full output. The autotuner
range, and other Quadra specs, can be viewed here:

http://www.yaesu.com/amateur/quadtx.html

Best 73,
Adam, VA7OJ/AB4OJ
North Vancouver, BC, Canada
http://www.qsl.net/ab4oj/
Note new e-mail address:
mailto:[email protected]

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Matt Erickson
Sent: July 21, 2002 06:38
To: [email protected]
Subject: Re: [Icom] pro proll and vl1000 quadra linear

Contact Adam VA7OJ, he is using the combo, and it works great. Stop in on
his web site to see it; www.qsl.net/ab4oj/

73 de Matt KK5DR

At 05:56 AM 7/21/02 -0400, you wrote:
>is any one in Europ using this combo pro or proll and yaesu vertex vl1000
>quadra linear ?
>i like to know how good is the atu on it how good it will tune up
>i think there have to be to many protaction on it ,and some time the linear
>will not
>work . the 2nd thing is the pro or proll need to run 100 w when using the
>linear ?
>or what ?
>many thanks for any one can have time to answer best 73
>to you all
>Paim DL9FCC
>----