[Icom] 706MKII-G recive

[Stephen M. Parker]

Just a quick thought - you mentioned changing antennas to see if that
was the problem. Were you still using the same mount?

I had a similar problem with a mobile HF rig a couple of years back and
I tried a different antenna with no change. Then for some reason, I
tried a different type of mount and discovered it cured the problem! It
turns out the orginal mount (a trunk lip mount) wasn't making a good
enough ground connection, and would vary the signal strength when the
vehicle was in motion.

________________________________________________________________
Stephen, WR9A    -   Lafayette, Indiana   -    wr9a@commsec.com
________________________________________________________________
RX/TX: Icom 756Pro, 706MkIIG, 910H, Q7A, R8500, R10 
       Yaesu FT-817, Kenwood TH-F6A, Uniden BC780XLT/BC895XLT
Digital: Universal M-8000, Timewave PK-232/PSK
________________________________________________________________

-----Original Message-----
Subject: Re: [Icom] 706MKII-G recive

...My first thought was there is an antenna problem, so I changed
antennas but saw no change...