[Icom] IC-751A

Mon, 8 Jul 2002 10:31:06 -0500

Hi Ron ,According to the service manual you only need to make the jumper
changes if you place the FL70 in the FL32A position.W98/99 are located just
to the back and left of the fl80 position,almost at the left rear
corner.Hope I helped.Chris,KB9ZLJ
----- Original Message -----
From: "Ron Lowrance" <[email protected]>
To: <[email protected]>
Sent: Monday, July 08, 2002 8:45 AM
Subject: [Icom] IC-751A

I need some advise on adding the FL-70 filter as a replacement to the FL-80
filter.  I see that 2 jumpers are required to be changed on the main board
but I cannot find them.  Can anyone assist?

K4SX
Ron Lowrance
http://www.k4sx.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom FAQ: http://www.qsl.net/icom/