[Icom] switching voltage

Tue, 02 Jul 2002 20:37:06 -0500

Marty, I will send some pictures for you to look at.  The connections are
simple, very simple if you are only using the keying relay portion.  Most of
the device is designed to protect transceivers from damage from RF coming
back into the unprotected aux. ant input.  Also, all connections are made
from existing connectors on your transceiver...you DO NOT have to open the
radio up...de gary, kd9sv

PS: if you are not able to open the word document, go to the link on the
E-mail from Adam Farson...he has my Front-end-saver document on his web
site.
----- Original Message -----
From: "martyp" <[email protected]>
To: <[email protected]>
Sent: Tuesday, July 02, 2002 4:32 PM
Subject: Re: [Icom] switching voltage

> Hello Gary,
>
> What all do you need to get the relay to work ? Does it use an Alc, keying
> line, and ground ? Also, how much is it... I am on a disability income and
> can't afford a fortune... I really appreciate you emailing me back, Gary.
> Also... I need a non-ham to help me hook it up due to being visually
> impaired...so, would it be hard for my xyl ?  Thanks again. 73 es g.b.
>
> Best regards,
> Marty, W3QK
>
> At 08:31 AM 7/2/2002 -0500, you wrote:
> >Hi Marty,  my keying relay has only 3.5vdc at 1.5 milliamps  load on the
T/R
> >or QSK output of your transceiver, in addition, provides automatic
switching
> >off of auxillary receive antennas to protect your rig from RF damage when
> >using beverage type antennas.  E-mail me for further information...de
gary,
> >kd9sv
> >----- Original Message -----
> >From: "martyp" <[email protected]>
> >To: <[email protected]>
> >Sent: Monday, July 01, 2002 9:08 PM
> >Subject: [Icom] switching voltage
> >
> >
> > > Hello all,
> > >
> > > I just received an Ameritron Al1200 which has a keying v of 12v @
> >100ma....
> > > I have a new Icom 756 PRO II. Do I need an external relay for the Icom
?
> > > Has anyone had experience with the Al1200 and an Icom 756 Pro or Pro
II
> > > over a period of time ? Thanks for the response and 73, g.b.
> > >
> > > Kindest regards,
> > > Marty, W3QK
> > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> >
> >
> >----
> >Your Moderator: Dick Flanagan W6OLD, [email protected]
> >Icom FAQ: http://www.qsl.net/icom/
>
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/

--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  image/jpeg
  image/jpeg
  message/rfc822
  application/msword
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---