[Icom] IC 746 mike

Sat, 26 Jan 2002 00:42:36 -0500

If you use a non ICOM mic, make sure you put a blocking capacitor in series
with pin 1. I think you can still get 8 pin mic connectors in Radio Shack. A
plain Shure 444 has too high of an impedance and maybe not enough gain for
any ICOM Radio. You might get away with 444D which is low impedance but
still gain might be too low. I would advise using an ICOM mic or a Heil.

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Tom Johnson
Sent: Saturday, January 26, 2002 12:23 AM
To: ICOM Reflector
Subject: [Icom] IC 746 mike

I assume from what I've read here that a Shure 444 can be used with the 746.
If so, where can I pick a mike  connector for the rig at a reasonable cost?
.
.Thanks to all in advance.

Tom

N4tj

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
List Archives : http://mailman.qth.net/pipermail/icom/
List Control  : http://mailman.qth.net/mailman/listinfo/icom/
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.317 / Virus Database: 176 - Release Date: 1/21/2002