[Icom] Icom 756 Pro & RTTY

Fri, 18 Jan 2002 17:07:52 -0000

My 756PROII settings are:

RTTY Mark Frequency          2125
RTTY Shift Width             170
RTTY Keying Polarity         Normal
RTTY Decode USOS             ON
RTTY Decode New Line Code    CR,LF,CR+LF

and the decoder works fine.  Almost as good as mmtty

de Paul, W8AEF

----- Original Message ----- 
From: Geo Clute W7LFD <[email protected]>
To: <[email protected]>
Sent: Thursday, January 17, 2002 5:21 PM
Subject: [Icom] Icom 756 Pro & RTTY

> 
> 
> Is there a secret to setting up decode for RTTY?  Listening on 40
> meters with mark set at 2125. Shift with at 170. Decode USOS set to
> off. New line code set to CR+LF Keying polarity set to Normal. RTTY
> filter ON.
> 
> When tuning a RTTY signal I seem to only get random noise or nothing
> depending on the threshold setting...or tuning across the RTTY signal.
> 
> Thanks in advance for any help.
> 
> Geo W7LFD
> 
> _______________________________________________
> Icom mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/icom
> 