[Icom] Icom 756 Pro & RTTY

[Ekki Plicht]

> Is there a secret to setting up decode for RTTY?  Listening on 40
> meters with mark set at 2125. Shift with at 170. Decode USOS set to
> off. New line code set to CR+LF Keying polarity set to Normal. RTTY
> filter ON.
>
> When tuning a RTTY signal I seem to only get random noise or nothing
> depending on the threshold setting...or tuning across the RTTY signal.

Hm, no secret.. works fine here.
Did you try and change polarity? Which sideband do you use? "RTTY" or
"RTTY-R"?
Which filter width do you use?

I find it quite hard to tune with the small tuning display on the 756Pro
screen. Maybe you are a little bit off frequency?

73,
Ekki, DF4OR