[Icom] Pro2 question RTTY filter

Wed, 27 Feb 2002 16:31:16 -0700

On Thu, 28 Feb 2002 00:13:41 +0100 "Ekki Plicht" <[email protected]> writes:
> Hi all,
> does the new IC-756Pro2 allow to choose which tones (hi or low) are 
> used when the RTTY filter is turned on? 

Hi Ekki

I looked through my manual and saw no reference to that selection.   It
does indicate the pass band tuning knob becomes an IF shift funtion
during RTTY operation but in trying that it only give you about 160 Hz
shift.

If the RTTY FILTER button is on, there are no options to select different
filters.  That is fixed, apparently as part of the decoder circuitry.  
If you do not have the RTTY FILTER on, then you can select one of the
three RTTY filters you have selected from the filter setup.  However you
cannot change the center frequency of the filter.

Jim  K5QQ
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.