[Icom] IC-u2AT Offset Question.

Thu, 14 Feb 2002 21:41:36 0000

Don't know about the u2AT but the only offset that I know of on the 2AT is the +- switch at the back and unless the radio is modified for a different offset it is only 600khz either + or -. Good luck with the u2AT.
---
Have a good day. John kc8frw

On Thu, 14 Feb 2002 08:19:15  
 Gary V. Smith wrote:
>Dear List Members,
>
>I sent this to ICOM tech support, but I thought I'd try to jog your 
>collective memories and maybe get a response a little sooner.
>
>I've recently started using my IC-u2AT again after several years of using 
>more recent technology HTs. Out of a need for simplicity of operation my 
>old u2AT fits the bill. However, I need to be able to set the HT for the 
>primary Army MARS 2m repeater set of 143.990/148.010. When I was using the 
>u2AT some years ago I remember that the MARS frequency pair had to be 
>placed in either memory 0 or 1. I have no problem setting the frequency 
>pair, but I think I remember that there was a way to have the 4.02 MHz 
>offset required for MARS in the one memory location while still maintaining 
>the standard .600 MHz offset for standard repeater operations in the other 
>memory locations. I just can't remember how to do that now and the manual 
>doesn't speak clearly to this. Must be that age thing..hi..hi.
>
>Any help refreshing my memory (no pun intended) would be greatly appreciated.
>
>BTW, I also have an IC-2AT and would like to know how to set the MARS 
>offset on it, if that's possible.
>
>73,
>Gary Smith - KD6RXT / AAM5MI / AAR5MU
>Dowagiac, MI
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>List Archives : http://mailman.qth.net/pipermail/icom/
>List Control  : http://mailman.qth.net/mailman/listinfo/icom/
>

Check out Cupid School where you will learn from Matchmaker's
best and brightest. Good Luck!

http://ecard.matchmaker.com/cupid0202/cupid0202.html