[Icom] 10M mod for PW1

[Julio]

Well I did it. I removed the diode on the main board to activate the 10M
portion of the PW1. Not much of a problem except that when the diode came
off the board it sprung out of the fine nose tweezers I was using and I
can't find it. I'm almost sure it flew out of the amp, but I've been unable
to locate it. I have however cleaned to floor of all the little pieces of
black insulation and small black screws within a 10 foot radius of the
workbench. I even turned the amp upside down in the hopes that it might have
dropped inside, but nothing.

The amp is working with no smoke so I guess it will be OK.

Thanks again to all who helped with the information.

73's Julio