[Icom] 781 Problem

Sun, 10 Feb 2002 19:41:32 -0500

  John & Mike,

That sure sounds like my problem. I' ll give that a try tomorrow after 
work, in the mean time I think I'll leave the rig on as it hasn't been 
used for a while and possibly letting everything get warm may make it 
more stable when I adjust it.

Thanks,

Richard / N1VXW

---------------------

On Sunday, February 10, 2002, at 06:03  PM, John L Merrill wrote:

> Here the copy from the service faq.....
> Symptom: No RX/TX on 20 kHz of each 500 kHz tuning step, especially when
> radio is cold or first powered up.
> Probable Cause: PLL unlock.
> Cure: Adjust DDS-LPL in both PLL A and B units for proper lock voltage.
>
>> -----Original Message-----
>> From: [email protected] [mailto:[email protected]]On
>> Behalf Of [email protected]
>> Sent: Sunday, February 10, 2002 8:17 PM
>> To: [email protected]
>> Subject: [Icom] 781 Problem
>>
>>
>> My 781 seems to be dead on the first 25Khz segment of every
>> 500Khz from 500Khz to 30Mhz.
>>
>> Any clues would be greatly appreciated.
>