[Icom] External Keypad for PROII

Sun, 10 Feb 2002 11:03:59 -0800

yes Michael, check the December 1999 issue of QST if you can... John
Hansen, W2FS wrote an article on building your own direct entry keypad
for any Icom transceiver which is equipped with a CI-V port. For more
info try him at /[email protected]/.

"Michael M. Raskin" wrote:

> Does anyone know if there is a commercially available keypad for the
> 756PROII?
>
> Mike, W4UM (ex-K4KUZ) [email protected] or [email protected]
> Florida Contest Group   http://www.qsl.net/fcg/
> South Florida DX Association   http://www.qsl.net/k4fk/
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> List Archives : http://mailman.qth.net/pipermail/icom/
> List Control  : http://mailman.qth.net/mailman/listinfo/icom/