[Icom] Icom 706 MK II & SB220 amp

Fri, 27 Dec 2002 19:21:16 -0800

Hi Kurt,

Harbach Electronics Inc. offers a keying interface module (SK-220) for the
SB-220. You can download a PDF instruction sheet from their site.

http://www.harbachelectronics.com/

http://www.harbachelectronics.com/pdffiles/sk-220.pdf

You will need to make up a cable to connect the IC-706 ACC socket to the
SK-220. I do not have the pinout in front of me, but it should be in your
user manual.

Best 73,
Adam, VA7OJ/AB4OJ
North Vancouver, BC, Canada
http://www.qsl.net/ab4oj/
Icom FAQ site:
http://www.qsl.net/icom/

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Kurt W. Zimmerman
Sent: Friday, December 27, 2002 19:00
To: '[email protected]'
Subject: [Icom] Icom 706 MK II & SB220 amp

OK folks;
	It's one of those things where I blow thru a bunch of emails and never pay
attention to what goes on until I need something.  None the less, I would
like to connect my IC-706 MKIIG to my SB220 amp.  Where might I find
information on this.  I need to key the amp and not sure how to wire it.
 Thanks in advance.

73
Kurt - W2MW

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/