[Icom] 756 Pro II w/remote DVR

Sat, 7 Dec 2002 16:33:55 -0600

George, specifically what manual are you referring to, please?  Thanks,
Bill/k3yc
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Saturday, December 07, 2002 10:18 AM
Subject: Re: [Icom] 756 Pro II w/remote DVR


> On 6 Dec 2002 at 23:32, George, W5YR wrote:
>
> > I made the simple switch box described in the manual for selecting and
> > transmitting either voice or CW memory messages. It requires a mic
> > plug and length of cable, four SPST pushbutton switches and four
> > resistors, plus a small project box to hold it all. Works very well.
> > Menu determines whether a button push transmits a voice message or a
> > CW message.
> >
> > I am not aware of any commercial product like this, but it is a
> > two-hour project at best, including driving to Radio Shack for the
> > parts!   <:}
> >
> > 73/72, George
>
> George -
> Does this work with only the PROII or will it work with the PRO?  I see
> the info and print for it was only in the PROII docs.
> Thanks,
> Jim - K5LAD
> =============================================
> My Web Page - http://www.hayseed.net/~jpk5lad
> 'Ya come visit it, 'yahear
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>