[Icom] Sherwood Engineering cooling fan kit for IC-781

Mon, 02 Dec 2002 18:57:23 -0800

Why not obtain a used CPU fan?  Attach it to the outside of the case, 
moving air in the correct direction, and tap the poer off the rig?

Chris opr VE7HCB

At 09:29 PM 2002-12-02 -0500, you wrote:
>Is there such a kit available for the 706MKIIG.  I've never been
>comfortable with the temperature that the rig runs at.
>
>73,
>
>Dave, N1PC
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]] On
>Behalf Of [email protected]
>Sent: Monday, December 02, 2002 7:51 PM
>To: [email protected]
>Subject: Re: [Icom] Sherwood Engineering cooling fan kit for IC-781
>
>
>Don
>I have installed the Kit on both of my 781s and my 9000 the 781 kit
>looks
>better than factory and the fam is quite also you now can put your hand
>on
>the back radio and has slight warmth and yes you can rerturn too
>stock,but
>you will never want too it took one hour to install the fan, on the 781
>and
>about 2 hours on the 9000.
>
>Best money spent and gets rid of all the heat.
>
>Phil KG4LRU
>
>
>--- StripMime Report -- processed MIME parts --- multipart/alternative
>   text/plain (text body -- kept)
>   text/html
>The reason this message is shown is because the post was in HTML or had
>an attachment. Attachments are not allowed. Please post in Plain-Text
>only.---
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected] Icom
>Users Net: Sundays, 1700Z, 14.315 MHz Icom FAQ: http://www.qsl.net/icom/
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/