[Icom] IC-701

Thu, 15 Aug 2002 17:08:58 -0600

The receive problem is common -- probably dirty contacts on the T-R
relay.  Clicking quickly to transmit will usually resolve although
replacement of the relay might be needed.

The display stuck on 14.000 might be easy -- there is a dial lock
function.  Check to make sure that isn't locked before you go much
farther.

The no RF output is a bit more ominous.

I still have a 701 but haven't used it for years.  It has low output on
10m -- the result of a bad antenna -- but otherwise has held up well.
The 701 is certainly vulnerable to bad antenna matching.

73,
Mike WA0SXV

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Gareth Gammon
Sent: Thursday, August 15, 2002 16:55
To: [email protected]
Subject: [Icom] IC-701

Good afternoon. I just joined this list and am looking forward to
reading the postings. I will be getting an IC-701 that has a problem.
The receiver makes noise but does not receive signals. There is no rf
output and the display works but does not change when working the tuning
dial. The display seems to read 14.000 and doesn't change. I don't know
yet if the display changes when the band switch is changed.

Has anyone come across this problem before and where should I start to
look for the fix?

The radio is in beautiful shape otherwise and deserves a better future
than in a junk box for parts!!

It will be my most modern rig. My TS-520 currently holds that position
in my shack. HI HI!!

73
Gareth Gammon
Fort St. James, B.C.
VE7CGG
----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom FAQ: http://www.qsl.net/icom/