[Icom] Replacing the IC756 display

Fri, 2 Aug 2002 21:50:22 -0400

Maybe he should have read his manual first...hi hi


----- Original Message -----
From: "Matt Erickson" <[email protected]>
To: <[email protected]>
Sent: Friday, August 02, 2002 9:46 PM
Subject: RE: [Icom] Replacing the IC756 display


> I have had two IC-756 radios, one very early 13XX serial #, the other very
> late # 39XX. Neither one had the display problems some have mentioned.
> It must be the "luck or the draw", if you have a bad one.
>
> 73 de Matt KK5DR
>
> At 09:50 AM 8/3/02 +0800, you wrote:
> >Hi Johnny,
> >
> >I really could not advise what action you should take about getting a
> >spare LCD.
> >
> >However  I do know many 756 owners have not had any trouble at all,
> >so you may be one of those lucky ones.
> >
> >Apparently there was a bad batch of LCD's received by ICOM from
> >the manufacturer. Hopefully most are OK, but if those lines appear
> >then that is the time to seek a replacement!
> >
> >73...Don VK6HK
> >
> > > Hi Don,
> > >
> > > It is very resourceful for your message.  I have bee using an IC756
> > > with serial number >3,900 since early 1998. I do not suffer from the
> > > problem mentioned by you but do I need to stock up a spare piece
> >of
> > > LCD for future repair.  Could you advise me the failure rate of IC756
> > > LCD.
> > >
> > > Thank you very much in advance.
> > >
> > > 73
> > >
> > > Johnny Siu VR2XMC
> > >
> > >
> > >
> > >
> > >
> >_______________________________________________________
> >__________
> > > �ϥΥ��y�̦h�H�ϥΪ��q�l�l��A�� MSN
> >Hotmail�Ghttp://www.hotmail.com
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, icom-
> >[email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> >
> >
> >----
> >Your Moderator: Dick Flanagan W6OLD, [email protected]
> >Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>