[Icom] 756Pro Acc 2 Plug

[Larry Winslow]

I just looked on the back of my IC-765 & the ACC-2 socket is a 7 pin din=20
socket as you described. Just beside it is ACC-1 which is an 8 pin din=20
socket. I couldn't see any reason why you can't remove the center pin from=
=20
an 8 pin connector - should work just fine. I seem to remember finding 7=20
and 8 pin DIN connectors at Radio Shack.

73 - Larry W=D8NFU



At 11:51 AM 4/26/02 -0600, you wrote:
>The Icom 756PRO ACC 2 plug is a 7 pin DIN connector.  I have not seen 7 pin
>connectors readily available.  Can you remove the center pin from an 8 pin
>DIN connector or are 7 pin plugs readily available?
>
>73,
>Tom
>KQ5S
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
>Icom FAQ: http://www.qsl.net/icom/