[HoustonHam] Crane Services

[Dan - WA5ANF]

Ken,

I have had excellent results and good experiences using TNT Crane & Rigging.
I have used them on many of my construction projects -- both large and
small -- and they have always been great to work with.

TNT Crane & Rigging
9401 Center Point Dr.
Houston, TX 77054

Tel: (713) 644-6113
Alt: (800) 799-2505

http://www.tntcrane.com/home/

Since you need more "stick" than lift capacity, they should have a smaller
motor crane that can do the job for you so don't be scared off by the
pictures on their web site.

If you are flexible with respect to time, they might be able to schedule you
for a time when they have a rig in your area to minimize "road" time.
Regardless, be prepared to pay a four hour minimum from just about anyone in
the business.

73,

Dan Gannon, WA5ANF







-----Original Message-----
From: houstonham-bounces at mailman.qth.net
[mailto:houstonham-bounces at mailman.qth.net]On Behalf Of Kenneth R.
Goodwin, Jr.
Sent: Tuesday, February 08, 2005 10:16 AM
To: Houston Hams
Subject: [HoustonHam] Crane Services


Looking for a source/recommendation for a turn-key crane service to remove
and later install a 20 foot tower section from a 80 foot tower.  Weight
isn't a constraint but due to access restrictions (perform lift over the
house), the crane would probably have a 100 - 120 foot height
capability.  Many years ago I used Phillips Crane & Rigging.  Any good
recommendations?  Thanks, Ken Goodwin, K5RG Webster, Texas  Reply to
kgoodwin at houston.rr.com


______________________________________________________________
HoustonHAM mailing list
Home: http://mailman.qth.net/mailman/listinfo/houstonham
Help: http://mailman.qth.net/faq.htm
Post: mailto:HoustonHAM at mailman.qth.net