[HomeBrew] Questions about passive components

[Bill Cromwell]

Hi,

We need tight (more expensive) tolerance to build labortory grade 
instruments. For ham and most radio gear not so much. And by the 
way..tolerances apply to *everything*. "12" volts is rarely ever 
12.000000000000 volts and may be as low as 10 volts or up around 15 
volts and everywhere in between. I hope this doesn't give you bad dreams 
<evil grin>.

73,

Bill  KU8H



On 01/22/2016 11:32 AM, John Marshall wrote:
> ** Please do NOT cross-post messages when posting to HOMEBREW **
>
> Hmmm, I didn't explain this completely enough for the numbers to make sense...
> In the number series I gave, the numbers increment by 10 percent, not 5 percent. They are still called "5 percent values" based on plus-or-minus 5 percent, which gives a total range of 10 percent. For example, 1.0 plus 5 percent and 1.1 minus 5 percent both give 1.05.
>
> John, KU4AF
> Pittsboro, NC
>
> On Jan 22, 2016, at 11:00 AM, John Marshall wrote:
>
>> ** Please do NOT cross-post messages when posting to HOMEBREW **
>>
>> Richard,
>>
>> A good topic for a wintry day. Sometimes we hear these values referred to as "standard 10 percent" or "standard 5 percent" values. The numbers are derived by starting with 1 and repeatedly increasing it by 5 or 10 percent and rounding off to two significant figures. Thus the standard 5 percent values:
>> 1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.2, 6.8, 7.5, 8.2, and 9.1.
>>
>> Larger and smaller values are the from this series multiplied by powers of 10. Same way with 1, 2 or 10 percent values.
>>
>> John, KU4AF
>> Pittsboro, NC
>>
>> On Jan 22, 2016, at 10:01 AM, R. Blackman wrote:
>>
>>> ** Please do NOT cross-post messages when posting to HOMEBREW **
>>>
>>> Hello to group.
>>> Not much activity these days so I thought a discussion would be fun.
>>> Question:
>>>
>>> why do components have the 'standard' values that the have?
>>> for example:  resistors have 47 , 470, 4.7K 47K etc,  instead of perhaps 48 which is easier math  for 12 volts
>>> Why does a 1/4 watt resistor have the value 49.9 instead of 50 ohms? ( just checked digikey)
>>> Capacitors:  seem to like the numbers 22, 33  or 68 for example.
>>>
>>> does this refer back to the old days of high voltage systems?
>>>
>>> Happy to hear any ideas
>>>
>>> Have fun
>>>
>>> Richard VA3NDO
>> ______________________________________________________________
>> HomeBrew mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/homebrew
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:HomeBrew at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> HomeBrew mailing list
> Home: http://mailman.qth.net/mailman/listinfo/homebrew
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HomeBrew at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>