[HomeBrew] Plate Choke

[GGLL]

	Rick, try this reading:

http://www.somis.org/D-amplifiers4.html

search for the following string:  Anode HV RF Chokes

Best regards
Guillermo - LU8EYW.

Rick Brashear escribió:
> ** Please do NOT cross-post messages when posting to HOMEBREW **
> 
> Let me try to address all of the replies I have received in this post.
> First, I was referring to the DC resistance when I mentioned 10 ohms.  The
> plate impedance is about 6300 ohms.  The circuit utilizes two 810 triodes in
> parallel.  The existing plate choke has been very warm and I am trying to
> discern if it is still usably and at the same time I'm searching through my
> junk box to see if I have a substitute in case it's no good.  The existing
> choke is 5.8 mh at 1kc according to the manual.  However, that's all the
> info the manual gives for the choke.
>  
> Rick
> 
> _______________________________________________
> HomeBrew mailing list
> HomeBrew at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/homebrew
>