[HomeBrew] WTT

[NI4L]

  10 pole - 9 throw


    4kv - 20 amps
    Radio Switch Model 78

SWR-78-10-9
Deluxe radio switch model 78, a 10P9T configuration. Each of 5 thick
ceramic wafers has two poles with 9 positions per. 3" outer diameter,
6-1/2" long behind panel, 1/4" shaft. Bushing mount and by support head
This is brand new never been soldered to!




MACAW PRM-1 Really nice peak and avg reading meter. also has Hold and
follow on peak. 2000 watt meter uses 120 v for peak reading circuit.
Nice and BIG 8"wx4"hx6"d really works well.The case matches a Ham IV
rotor box looks just like it. 1.8-60 MHZ. I HAVE MANUAL AND SCHEMATICS.
http://www.eham.net/reviews/detail/2175       pic of wattmeter

I have a mobile amp Pride 100 Bi Linear amplifier says 10-80 meters on
the front
has ssb/am  preamp  works fine

10 METER 2 transistor amp About 60-75 watts out with a 10 amp 13.8 vdc
power supply built in so you could run a mobile in the house on it.

WHAT DO YOU HAVE LAYING AROUND ?   I could use  3 turns counters  among
some other thing need some high voltage componets  .001 @5kv caps, 80 uh
20uh  chokes  i have a list i am working on. maybe you have some of this
stuff in your junk boxes?

-- 
NI4L CUSTOM RESONANT DIPOLE
LEGAL LIMIT ++ CUSTOM MADE CENTER FED DIPOLE
Made with the same components used by our military forces today
Custom made to YOUR FREQUENCY of operation
Let me take the hassle out of making a RESONANT DIPOLE for you.
Click here for more info...  http://www.angelfire.com/nb/ni4l/