[HomeBrew] FS: Large Variable capacitors

[Eugene Rippen]

Large Variable capacitor. I measured it to be 50 mmfd open 180 mmfd closed.
1/2 inch spacing between plates (rotor to stator plates).  Distance between
the fron and rear base mounting holes is 14  3/4 inches.  Will require about
17  1/2 inches of inside  cabinet space.   6 inches wide and 8  1/2 inches
high.  Has 1/2 inch shaft.  It is used.  I see no defects, cracks, etc.  15
pounds.  $20
http://www.foothill.net/~soundval/VAR1-A.jpg
http://www.foothill.net/~soundval/VAR1-B.jpg
http://www.foothill.net/~soundval/VAR1-C.jpg
http://www.foothill.net/~soundval/VAR1-D.jpg

Large Variable capacitor. I measured it to be 45 mmfd open 300 mmfd closed
each side.  It is marked 40 mmfd open, 250 mmfd closed, however I trust my
capacitor checker to be fairly accurate.
It has common rotor, split stator.  1/4 inch spacing between plates (rotor
to stator plates).  Distance between the fron and rear base mounting holes
is 27  1/8 inches.  Will require about 27  1/2 inches of inside  cabinet
space.   4  1/2 inches high.  Has 1/4 inch shaft.  It is used. Looks very
good. I see no defects, cracks, etc.  16 pounds. $30.00
http://www.foothill.net/~soundval/VAR2-A.jpg
http://www.foothill.net/~soundval/VAR2-B.jpg
http://www.foothill.net/~soundval/VAR2-C.jpg
http://www.foothill.net/~soundval/VAR2-D.jpg


Eugene Rippen, WB6SZS
105 Donnington
Auburn, CA 95603