[Heathkit] Heathkit TT-1 Tube Tester Problem

Harry Williams willisw200 at msn.com
Sat Feb 22 08:29:17 EST 2020


Hi Wayne,
I am still working on it. Going to extend the tester tube socket and make some measurements at the pins. For now I can get an idea of how the tube is performing by using a bias of 40L instead of 20L. That puts the readings within the meter range so I can get a relative idea between different tubes as to which are better. So far I have not found any other tube types that show this behavior where the meter pegs using the suggested test settings.

73,
Harry
W0LS

From: hwhall at compuserve.com <hwhall at compuserve.com>
Sent: Friday, February 21, 2020 22:56
To: bill.riches at verizon.net; heathkit at mailman.qth.net; willisw200 at msn.com
Subject: Re: [Heathkit] Heathkit TT-1 Tube Tester Problem

How did this work out?

Wayne
WB4OGM
-----Original Message-----
From: B Riches via Heathkit <heathkit at mailman.qth.net<mailto:heathkit at mailman.qth.net>>
To: heathkit at mailman.qth.net<mailto:heathkit at mailman.qth.net> <heathkit at mailman.qth.net<mailto:heathkit at mailman.qth.net>>; Harry Williams <willisw200 at msn.com<mailto:willisw200 at msn.com>>
Sent: Wed, Feb 19, 2020 6:29 pm
Subject: Re: [Heathkit] Heathkit TT-1 Tube Tester Problem
Hi Harry,
I will test a 12by7 on mine tomorrow.73,Bill, WA2DVU
    On Wednesday, February 19, 2020, 03:57:53 PM EST, Harry Williams <willisw200 at msn.com<mailto:willisw200 at msn.com>> wrote:

Hi....I am having trouble testing a 12BY7 on my TT-1 tube checker. I have tried testing 5 or 6 of them and when I pull the gm test switch the meter slams the right hand peg on all the 12BY7's. Other tubes seem to test just fine. I have gone through all of the operational checks and calibration procedures and everything looks ok. So I am wondering if the settings in the tube list are correct. I have the latest supplement (1978) and I do not see any updates in the settings for that tube. So I am wondering if someone else that has a TT-1 that has tested a 12BY7 can verify that the settings for that tube are correct.

Thanks and 73's
Harry
W0LS
______________________________________________________________
Heathkit mailing list
Home: http://mailman.qth.net/mailman/listinfo/heathkit
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Heathkit at mailman.qth.net<mailto:Heathkit at mailman.qth.net>

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net<mailto:gharmon at idworld.net> **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Heathkit mailing list
Home: http://mailman.qth.net/mailman/listinfo/heathkit
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Heathkit at mailman.qth.net<mailto:Heathkit at mailman.qth.net>

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net<mailto:gharmon at idworld.net> **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


More information about the Heathkit mailing list