[Heathkit] [HeathKit-Radios] DX-100 advice needed

[Bry Carling]

I also have a nice GRAY DX100 Cabinet for sale. Heavy!

Available for $30.00 plus shipping.


(Be aware shipping may cost as much as the cabinet!)

Local delivery available also. (in Florida)


73 - Bry


= = =

 From earlier



I have TWO DX00 chasses for sale. One is copper. The other is not.

I believe one is from the DX100 I had and the other is from a DX100B.


Both of them are for sale CHEAP if someone wants to create a nice repair job or make a DX100 "KIT!"


73 de AF4K, Bry


________________________________
From: HeathKit-Radios at yahoogroups.com <HeathKit-Radios at yahoogroups.com> on behalf of rusty rusty_radio at yahoo.com [HeathKit-Radios] <HeathKit-Radios at yahoogroups.com>
Sent: Wednesday, October 4, 2017 2:58 PM
To: HeathKit-Radios at yahoogroups.com
Subject: Re: [HeathKit-Radios] DX-100 advice needed



hi, if you can totally strip everything off the chassis and sand it clean then you can copper plate it very easy. See this Youtube  Easy Copper Plating Of Steel<https://www.youtube.com/watch?v=AiML2lvwWY8>
Thanks, Rusty K5IZ
<https://www.youtube.com/watch?v=AiML2lvwWY8>




[https://s.yimg.com/nq/storm/assets/enhancrV2/23/logos/youtube.png]
Easy Copper Plating Of Steel
This little method puts a tough thin copper coat onto steel by cleaning the steel first then using a replacement...






________________________________
From: "'Mike Melnik' mmelnik1 at wi.rr.com [HeathKit-Radios]" <HeathKit-Radios at yahoogroups.com>
To: HeathKit-Radios at yahoogroups.com
Sent: Wednesday, October 4, 2017 11:25 AM
Subject: RE: [HeathKit-Radios] DX-100 advice needed


Kees

The DX100B had a steel chassis, there is another ham on the reflector that
may have a new steel chassis

The following is his web site:

http://af4k.com/DX100_parts.htm

Hope this helps you out

73

Mike Melnik-N9PMO
BPQ32 Yahoo Groups Moderator

-----Original Message-----
From: HeathKit-Radios at yahoogroups.com
[mailto:HeathKit-Radios at yahoogroups.com]
Sent: Wednesday, October 04, 2017 10:04 AM
To: HeathKit-Radios at yahoogroups.com
Subject: [HeathKit-Radios] DX-100 advice needed


I managed to buy an almost original DX-100 via ebay. But also this one has
the well-known ailment of the damaged copper chassis. Does anyone have
experience to repair this or does the whole chassis need to be
copper-plated again? I would like to hear your experiences.

Thanks, Kees PA0KME

---
This email has been checked for viruses by AVG.
http://www.avg.com







__._,_.___
________________________________
Posted by: Bry Carling <AF4K at hotmail.com>
________________________________


Visit Your Group<https://groups.yahoo.com/neo/groups/HeathKit-Radios/info;_ylc=X3oDMTJlMzZpMWRyBF9TAzk3MzU5NzE0BGdycElkAzIzODUwNjQEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTUwODQyMjI1Mg-->

  *   New Members<https://groups.yahoo.com/neo/groups/HeathKit-Radios/members/all;_ylc=X3oDMTJmNWt1dTRnBF9TAzk3MzU5NzE0BGdycElkAzIzODUwNjQEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwN2dGwEc2xrA3ZtYnJzBHN0aW1lAzE1MDg0MjIyNTI-> 1

[Yahoo! Groups]<https://groups.yahoo.com/neo;_ylc=X3oDMTJkMzRtZThrBF9TAzk3NDc2NTkwBGdycElkAzIzODUwNjQEZ3Jwc3BJZAMxNzA1MDYzMTA4BHNlYwNmdHIEc2xrA2dmcARzdGltZQMxNTA4NDIyMjUy>
• Privacy<https://info.yahoo.com/privacy/us/yahoo/groups/details.html> • Unsubscribe<mailto:HeathKit-Radios-unsubscribe at yahoogroups.com?subject=Unsubscribe> • Terms of Use<https://info.yahoo.com/legal/us/yahoo/utos/terms/>

__,_._,___