[Heathkit] Need an SB-10x board or coil slug

[Ron Youvan]

   From: "Alexander N. Gerli" <ac1wye at gmail.com>

Hi, Friends! Small wonder the 21MHz band in my SB-102 won't peak...the
coil slug in the 21MHz Driver Plate coil form is MISSING! So, I need
either a slug or a spare-parts Board I can get a slug out of.

I would hope that the core material for these slugs is the same
throughout.

Can someone on the List help me with this little bit?
73,  Sandy AC1Y
-- 
Sent from Sandy's Gmail Mobile
==================================

   I think you need to check to see if it started out with a slug, not
everything does/did, by asking others and looking at the construction
manual closely.

   You can judge the tuning by of a coil inserting the tip of a small hex
key (wrench) in it while operating it, then a small brass rod, one will
increase and the other decrease the inductance.

   You might be able to move a slug from elsewhere temporary to see if it
is really needed.

   As far as I know the coils in Heath equipment used the common slugs
found in many IF transformers of the same vintage.  (powered iron)

   Never use a metal hex tool on these slugs, only use plastic tools.
   (or carve a loose one from wood)
-- 
   Ron  KA4INM - Youvan's corollary:
                 Every action results in unwanted side effects.
-------------- next part --------------
______________________________________________________________
Heathkit mailing list
Home: http://mailman.qth.net/mailman/listinfo/heathkit
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Heathkit at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html