[Heathkit] AT-1 manual info

[Glen Zook]

The Apache is the TX-1, not the AT-1!

The AT-1 was Heath's first "real" transmitter kit.  It uses a 6L6 in the final amplifier.
 Glen, K9STH 
Website: http://k9sth.net

      From: Ron Youvan <ka4inm at gmail.com>
 To: H <heathkit at mailman.qth.net> 
 Sent: Tuesday, September 13, 2016 7:47 AM
 Subject: Re: [Heathkit] AT-1 manual info
   
  Wayne WB4OGM hwhall at compuserve.com wrote:

> I'm looking for someone who has a completer AT-1 manual to verify some
information.  The AT-1 meter had an annoying habit of banging around when
on CW but the schematic & parts list show the meter switch was 3-position,
with the unmarked center stop turning the meter off while still letting
the transmitter operate. My question is whether this feature was actually
mentioned in the manual or if it was overlooked.

  My manual shows five meter positions.
(I own two AT-1 Apaches, both junkers that I never used)
  (my DX-100, I used)

  final Icathode
  driv. Icathode
  final Igrid
  high  Volts
  Mod  Icathode

  I found no reference to an "off" position in the verbiage.
  I am guessing that you are looking at some other schematic than that 
of the Apache.