[Heathkit] Plug for Heathkit VF1 VFO

[RAY FRIESS]

If you can't locate one, you can use an old trick we did way back when...
If you can find an old crystal, disassemble it and drill a small hold through the top of it,
run the cable in through the hole and solder it to the pins.   


> Date: Tue, 3 Feb 2015 17:10:05 -0500
> From: w1dfu at vermontel.net
> To: Heathkit at mailman.qth.net
> Subject: [Heathkit] Plug for Heathkit VF1 VFO
> 
> I am looking for the plug that was used to connect the VF1 to the 
> crystal socket of the AT1 as well as other rigs.
> 
> If I remember correctly it could also be used in an arrangement to 
> connect to pieces of 300 ohm twin lead together
> 
> Thank you, Bert W1DFU
> 
> I can send a picture of one to anyone that would like to see what it 
> looks like..
> 
> 
> ______________________________________________________________
> Heathkit mailing list
> Home: http://mailman.qth.net/mailman/listinfo/heathkit
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Heathkit at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html