[Heathkit] OT: Removing cover of Philips PM-6673 frequency counter

[Marshall Dues (K5MMD)]

Resending

On Mon, Feb 2, 2015 at 10:56 AM, Marshall Dues (K5MMD) <mmdues at gmail.com>
wrote:

> Hello, Robert,
>
> I have a PM-6624 520 Mhz timer/counter and just removed my top cover by
> removing two phillips screws on the rear panel just under the rear trim
> ring.  One screw is above the external battery connector posts and the
> other screw is above the Gate Monitor BNC connectors.  Remove these screws
> and lift the rear end of the top cover upwards and slide the whole top
> cover aft to disengage the trim ring on the front panel of the counter.
>
> The bottom cover comes of in a similar manner.
>
> Hope this helps.
>
> Regards,
>
> Marshall Dues,  K5MMD
> Katy, TX
>
>
>
> On Sun, Feb 1, 2015 at 10:21 PM, Robert Myers <rsmyers at rogers.com> wrote:
>
>> Bit of an odd question here, but does anyone know the proper way to remove
>> the cover of a Philips PM-6673 120 MHz frequency counter?  You would think
>> this would be obvious, but ...
>>
>>
>>
>> I have various issues of service manuals on the device but none seem to
>> explicitly describe doing that - unlike Heath manuals would :).  Although
>> they show a cutaway of the cover revealing locations of certain parts that
>> may need to be trimmed/jumpered, etc., they don't say how to actually
>> remove
>> the cover.
>>
>>
>>
>> I don't want to pry something and break it.  The one I have is already
>> damaged slightly.
>>
>>
>>
>> Thanks,
>>
>> -- Rob
>>
>> ______________________________________________________________
>> Heathkit mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/heathkit
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Heathkit at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>