[Heathkit] [Boatanchors] Long Threaded Shafts

[manualman at juno.com]

I assume you're talking about replacing the pot(s) which the bushing has
to go through the main panel and the escutcheon panel. If you can't find
a bushing on a pot long enough to go through both panels, you can remove
the escutcheon panel; enlarge the hole in question so that the nut will
tighten against the main panel. The knobs have a large enough skirt that
you can't see the hole enlargement.

Pete, wa2cwa

On Mon, 15 Sep 2014 10:32:11 -0500 "Gary H. Harmon, Jr."
<gharmon at idworld.net> writes:
> The Apache and Mohawk and possibly other Heathkits use pots with a 
> 9/16
> threaded shaft.  The pots available now do not have that amount of 
> threaded
> length.  The original pot is not available.  Has anyone developed a 
> way to
> adapt a current pot to the required 9/16 length needed to get 
> through the
> chassis, panel, etc?
> 
>  
> 
> Hopefully my question is clear.
> 
>  
> 
> Thanks in advance.
> 
>  
> 
> 73,
> 
>  
> 
> Gary H. Harmon, Jr. - K5JWK - HAM Radio Archaeologist
> 
> 6003 Archwood
> 
> San Antonio, TX 78239-1504
> 
> 210.657.1549h / 210.884.6926c/t
> 
> gharmon (at) idworld.net
> 
>  
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to manualman at juno.com
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>