[Heathkit] dx-60 problems

[Bwana Bob]

Dale:

It is probably the Function switch. The B+ is routed through different 
contacts in Tune position vs. AM and CW position. Inspect an clean the 
contacts.  I had this problem. I converted my DX-60A to PTT operation to 
save wear on the switch. The PTT mod requires no drilling and is easily 
reversible.

                     73,

                     Bob WB2VUF

On 9/2/2014 9:41 AM, wt4t at reagan.com wrote:
>               Just recapped the dx-60,went ok. Did the tune up, grid, every thing followed the book ok. readings were as expected in the manual.
> switched to AM to do final tune and loose B+ to the hg-10 vfo,both on cw and am. B+ is fine in the tune position. since the B+ would be the same in tune/cw/am, Iam guessing a switching problem anyone have any ideas ?
> 73
> dale   wt4t
>
> ______________________________________________________________
> Heathkit mailing list
> Home: http://mailman.qth.net/mailman/listinfo/heathkit
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Heathkit at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>