[Heathkit] DX-100 official modification and transmitter service information

[Chris Kepus]

Thanks for sharing, Glen. :-)

I had never seen the "Transmitter Service and Maintenance Hints".

That musta been a perk of living so close to Heathkit heaven. Hi Hi.

73,
Chris
W7JPG


-----Original Message-----
From: heathkit-bounces at mailman.qth.net
[mailto:heathkit-bounces at mailman.qth.net] On Behalf Of Glen Zook
Sent: Sunday, October 30, 2011 1:20 PM
To: heathkit at mailman.qth.net
Subject: [Heathkit] DX-100 official modification and transmitter service
information

I have been asked several times in the past couple of weeks for information
on various official modifications (Heath recommended) as well as things like
the tube pin voltages (which are not included in the manual) and general
transmitter servicing information.  This information was gathered over 50
years ago when I had my first DX-100.  Some of this information was widely
distributed but other information was not widely distributed.  However, all
the information came directly from Heath (when growing up I lived about 35
miles from the Heath plant on Hilltop Road in St. Joseph, Michigan).

I have added a link on my website with all of the official Heath
modification information on the DX-100 that I have.  Also included is the
tube voltage information and a Heath pamphlet on general transmitter
servicing.

http://k9sth.com/uploads/Heathkit_DX-100_mods-1.pdf

Glen, K9STH

website:  http://k9sth.com
______________________________________________________________
Heathkit mailing list
Home: http://mailman.qth.net/mailman/listinfo/heathkit
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Heathkit at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com ** 


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html