[Heathkit] kENWOOD LABEL

[W8BVH]

Greetings:
I found a metalized stick-on Heathkit label for a HD-1234. Is there a need 
out there for one of these???? I think it's in decent condition with the 
paper backing still on it.
Ralph Howes
W8BVH

----- Original Message ----- 
From: "Dick KF4NS" <kf4nsradio at verizon.net>
To: "Heath puck list" <heath at puck.nether.net>; <heathkit at mailman.qth.net>
Sent: Tuesday, April 19, 2011 5:18 PM
Subject: [Heathkit] HW100 stringing of load control pulleys


> Well, I got so frustrated that I gave it up for a while. Back at it
> again. I have tried 2 of the simpleist methods that were sent to me (4
> of them) and in each case I could not get more than a 90 deg turn.
>
> Obviously the problem is in the positioning of the pulleys before I
> start to string it, as well as the position of the tune knob. Like I
> said before, I is a lowly technician not a dad-burned engineer.  I can
> usually work out such problems eventually but I am out of patience
> now. Bout ready to put the rubber band back on.
>
> HEEEEELP!
>
> Thanks and 73, Dick KF4NS
> St Petersburg, FL 33714 USA
> Keep The Glow!
>
> ______________________________________________________________
> Heathkit mailing list
> Home: http://mailman.qth.net/mailman/listinfo/heathkit
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Heathkit at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html