[Heathkit] DX-35 Grid Drive

[Gene]

Bill:

Very interesting that you have too much drive -  I have a '35 that I
rebuilt some time ago and I have the opposite problem: very low drive.
So, could you send me some of your extra drie????

Gene, W0QFC




On Sun, 2010-11-28 at 09:05 -0500, Bill Stewart wrote:
> 
> During the last few days I fired up a DX-35 from the fix-it shelf and it worked ok from the start. However, I did find a few loose solder joints so went over it with the iron. I added a fuse and pulled the modulator tubes to reduce the load on the pwr xfmr. So far the only problem I see is too high grid drive on 80/40 mtrs. The min. I can get is around 3.5ma. and w/o much adjustment. Twenty mtr grid drive is adjustable from 1.5 to 5 ma. Any idea how I can reduce the grid drive on 80/40? It should be around 2.5ma. for the good health of the 6146. 
> 
> Thanks...73 de Bill K4JYS