[Heathkit] SA-2060

[Paul Kraemer]

Charlie
The 2060 can load virtually anything. I find the best way to find the sweet 
spot is set both caps at mid scale and turn the roller until the swr dips or 
peak is found on receive. Do the adjusting at low power (10w) to save the 
roller on the inductor though. When the swr dips, fine tune with the caps.
Paul K0UYA
----- Original Message ----- 
From: <HQ129X at aol.com>
To: <heathkit at mailman.qth.net>
Sent: Sunday, February 14, 2010 6:30 PM
Subject: [Heathkit] SA-2060


> Hello group,
>
>  I have a SA-2060 antenna tuner that can not give me a good match on  my
> 10-40 vertical. Yet when I use my Yaesu FC-102 or 902 tuner I can dial in 
> a
> perfect match. Any ideas on were to look? Since I acquired an Alpha 76PA I
> need  a tuner to handle the power. Many thanks Charlie  N9SOR
> ______________________________________________________________
> Heathkit mailing list
> Home: http://mailman.qth.net/mailman/listinfo/heathkit
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Heathkit at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>