[Heathkit] Rohn 25G Rotor Place U Bolts Source

[WA5ANF]

I have probably had dozens of those over the years, but none on hand now.
You should be able to pick those up at any hardware dealer in your area that
sells commercial grade hardware.  There is nothing special about those bolts
except that they are hot dipped galvanized.  Just measure the distance
between the holes on the plate, or take the plate with you, and you will
have the size of the three anchor bolts you need to mount the plate.  If you
care comfortable not having hot dipped galvanized, you can probably get them
in cadmium plated at any of the big box stores in your area for a few
dollars each.

Good luck,

WA5ANF



-----Original Message-----
From: heathkit-bounces at mailman.qth.net
[mailto:heathkit-bounces at mailman.qth.net] On Behalf Of Bill Mellema
Sent: Thursday, September 10, 2009 7:57 AM
To: Boatanchors Reflector; Heathkit Reflector
Subject: [Heathkit] Rohn 25G Rotor Place U Bolts Source


Does anyone have a source for the U Bolts for the rotor plate used in 
the Rohn 25G tower? I've tried the Rohn dealers with no luck....

Thanks,

Bill N3WM ______________________________________________________________
Heathkit mailing list
Home: http://mailman.qth.net/mailman/listinfo/heathkit
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Heathkit at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html