[Heathkit] GB> HW-18-2

[Bwana Bob]

Michael:

The high B+ provides plate voltage to the finals. My guess is that you 
would just see reduced output power.

				73,

				Bob WB2VUF

Michael Tauson wrote:
> On Thu, Nov 26, 2009 at 5:44 AM, Bwana Bob <wb2vuf at gti.net> wrote:
>> Also, according to Penson, if you use an HP-23 supply, make sure that the
>> low B+ is set to 250 V, not the 300 V setting as used by the HW-100/101 and
>> SB-101/102 series.
> 
> So I've been told.  I have a Drake AC-3 PS which can do everything
> except the high B+.  There it tops out around 600-650 volts.  (I can't
> remember the current rating.)  How much of a fuss would the HW-18 (or
> a HW-101) raise with such a reduced B+?
> 
> Best regards,
> 
> Michael, WH7HG