[Heathkit] GB> HW-18-2

[Bwana Bob]

Mike:

Also, according to Penson, if you use an HP-23 supply, make sure that 
the low B+ is set to 250 V, not the 300 V setting as used by the 
HW-100/101 and SB-101/102 series.

					73,

					Bob WB2VUF

Michael Tauson wrote:
> WOW!  All the help!  Thanks, folks, I do appreciate the emails &
> messages here.
> 
> For now, the rig will sit until I have AC and DC power supplies for it
> (AC for bench test now and DC for when I actually light it up for real
> use) as well as the carrier oscillator crystals for both USB and LSB
> (Neither came with it) so I can heat it up into a dummy load and see
> what kind of shape it's in.  I'm going with the idea that some caps
> will probably need to be swapped out but am holding out hope about the
> resistors et al.
> 
> Mahalo nui loa.
> 
> Best regards,
> 
> Michael, WH7HG