[Heathkit] begging again

[Mike McCarty]

sbjohnston at aol.com wrote:
> Ed wrote:
> 
>> Been there, done that. No luck.
> 
> That seems odd...  Let's take as an example Newark.  I go to 
> http://www.newark.com/ and choose Passive Components, then Capacitors.  
> Then I have the list of types, I'll choose Film.  That brings up the 
> search fields for film capacitors.   I highlight 1% in the tolerance 
> category and hit "apply".    Then I choose the value of interest - I 
> think you were looking for a 0.01 uF... hit "apply".  That has narrowed 

I believe he needed also 2uF, three (or more) of which I also need,
and which doesn't come up.

I've looked for this particular component sseveral times, and not found
it. I also need 0.02uF, which I could make up from two of the 0.01
just fine. I'd just need to make sure they were separated from each
other a little bit.

Thanks for that link! Now if only they had 2uF caps!

> it down to two choices:  a 63v cap with axial leads for $1.68, and a 
> 160v with radial leads for 58 cents.

Mike
-- 
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
Oppose globalization and One World Governments like the UN.
This message made from 100% recycled bits.
You have found the bank of Larn.
I speak only for myself, and I am unanimous in that!