[Heathkit] HO-10 etc. Re-Cap Kits

[Tom NØJMY]

Seeing the SB-620 thread got me to thinking -  maybe now is as good of a 
time as any to introduce our latest stock Heathkit re-cap kit.

So here it is:  A small batch of HO-10 re-cap kits *with resistors* is 
due in shortly, with more to follow. HO-13, SB-610, and SB-620 will be 
along shortly thereafter..

For convenience, these kits include replacements for the resistors most 
likely to fail or go out of spec.  The original 1/2 watt carbon-comps 
are replaced with 1 watt carbon-film, the 1 watt carbon-comps are 
replaced with 2 watt metal-oxide, and all are now rated at 500V.
	
Here's the can-cap spec:
33 uF @ 450V
22 uF @ 450V
22 uF @ 450V
22 uF @ 450V
all at 105C
twist-tab mounting.

The following discrete caps are also included:	
47 uF @ 450V  qty. 2	
10 uF @ 35V qty. 1	

Here are those HV Mylars:
.15 uF @ 1.6 KV  qty. 2	
.22 uF @ 630V  qty. 3	

And this is the resistor kit:
100k, 1 watt qty. 1
220k, 1 watt qty. 1
330k, 1 watt qty. 1
3.3meg, 1 watt qty. 2
1k, 2 watt qty. 1
15k, 2 watt qty. 1
33k, 2 watt qty. 1

Should it turn out that we've not got the best mix of resistors, we will 
get the needed units to you at no charge.

The HO-10 kits are priced at $48.75 + S&H, which runs a flat $4.00 on 
one kit.

The can-caps are the same specs for the other scopes, with the exception 
of the SB-620.  All have been engineered and scheduled.  The only hold 
up, other than lead-time, on kits for the other scopes is the tying-down 
of their respective resistor kits.  We would welcome any and all 
suggestions regarding this, especially from those of you that have had 
experience in rebuilding these Heath accessories.

As always, thank you for taking time to read this, and thanks, Mr. 
Moderator, for allowing me to post.

73,
Tom NØJMY .   .

Multi-section Can Capacitors
for vintage Heathkit, Drake, Halli, Hammy, more...
www.hayseedhamfest.com