[Heathkit] HL-2200 Question

[Carl]

2800-3000 is about right considering the tolerance of the metering 
resistors and the AC line voltage at the moment.

Carl
KM1H

.
----- Original Message ----- 
From: "Rick Markey, KN3C" <kn3c at arrl.net>
To: <heathkit at mailman.qth.net>
Sent: Sunday, September 07, 2008 2:50 PM
Subject: [Heathkit] HL-2200 Question


> What is the "normal" idle plate voltage for an HL-2200 in the SSB 
> mode?
> I'm seeing about 2800V which seems low to me but I've never owned one 
> of
> these before so the 2800V may be correct.  As I recall, the SB-220 ran
> at least 3KV or more.
>
> de Rick, KN3C
>
>
>