[Heathkit] FW: DX-100 for sale

[Glen Zook]

The spotting switch was an "authorized" Heath modification.  There was a kit available for adding the spot switch to the DX-100 and DX-100B which also included the necessary parts for improving the CW operation.

Glen, K9STH

Website:  http://k9sth.com


--- On Tue, 10/28/08, Kim Herron <kim.herron at sbcglobal.net> wrote:

> From: Kim Herron <kim.herron at sbcglobal.net>
> Subject: [Heathkit] FW: DX-100 for sale
> To: heathkit at mailman.qth.net
> Date: Tuesday, October 28, 2008, 7:17 PM
> Hi gang!!
> 	I'm posting this for a friend.  He has a DX-100 that
> is complete in
> a cabinet that needs a home.  Here's his address
> willsmusik at aol.com.  It was
> owned by a ham and has been stored for many years.  Bob has
> no way to test
> it.  It's complete but the chassis has corrosion on it
> and the front panel
> has would need replaced as the former owner made some mods
> to the
> transmitter (Spotting control, etc) and he put holes in the
> front panel to
> do it.  It also has had rack handles added.  It is in the
> original cabinet
> and I did not see any holes in that.  All the tubes are
> there.  This was a
> working piece when put in storage.  Does not appear that
> the mice were in
> it.  The SP-600 that I listed earlier this thing was used
> with still works,
> so the transmitter might actually do the same.  $120 takes
> it away.  Please
> reply to Bob, whose e-mail is listed in the beginning.  He
> has pictures that
> he can send you so you can get a better idea of what is
> there.  He is in
> eastern PA, not to far from Philly so you east coast guys
> might get a deal
> and Bob will work with you.
> 
> Kim Herron W8ZV 
> kim.herron at sbcglobal.net
> 1-616-677-3706