[Heathkit] SB 110 power info needed

[Michael Waldrop]

Sorry, forgot to include filament current requirements. The filament current requirements is 4.33amps AC or DC, 5 amps would due fine if you're building your own power supply.

Note, there are 3 pilot lamps in the 110, one for the meter and two for the dial. The meter lamp is "12 volt" while the two dial lamps are "6 volt". The 12 volt meter lamp is a #53 and the two 6 volt dial lamps are #47. This is important to know in the event one or more of the lamps fail.

73
Mike
W5RKL

--- On Fri, 10/24/08, Michael Waldrop <w5rkl at yahoo.com> wrote:
From: Michael Waldrop <w5rkl at yahoo.com>
Subject: Re: [Heathkit] SB 110 power info needed
To: heathkit at mailman.qth.net, "Greg Mijal" <bluebirdtele at embarqmail.com>
Date: Friday, October 24, 2008, 10:37 AM

The SB-110/A filament voltage requirement is 12 volts AC or DC. The SB-110A manual can be downloaded from the bama website.

73
Mike
W5RKL


--- On Fri, 10/24/08, Greg Mijal <bluebirdtele at embarqmail.com> wrote:
From: Greg Mijal <bluebirdtele at embarqmail.com>
Subject: [Heathkit] SB 110 power info needed
To: heathkit at mailman.qth.net
Date: Friday, October 24, 2008, 10:21 AM



 
 

Hi:
Does anyone know what the filament requirements are 
for the SB 110 and the SB 110A?
Tnx
Greg
WA7LYO
Kinston, NC


      


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/heathkit/attachments/20081024/d0180a5d/attachment.htm