[Heathkit] SB-200/SB-201 Parts Needed

[john]

Beat's me.

QSL.NET classifieds are ok.
EHAM classifieds are ok
QTH.COM classfieds are ok.

Ebay seems to be taboo, even though the bandwidth provider (Al Waller) 
allows it, and that's where all the interesting gear is.

Go figure... that's soooo... 1980s  !!

:-)

John K5MO


At 02:40 PM 1/6/2008, Tom Chesek wrote:
>Yes, I already advised Jim that eBay has it for sale. Why is everyone afraid
>to write the word "eBay"? Almost everyone uses it but pretends that they are
>above using eBay. I use all resources available when looking for something.
>If I need something I get it where it is available.
>
>Tom K3TVC
>
>
>----- Original Message -----
>From: "jeremy-ca" <km1h at jeremy.mv.com>
>To: "Tom Chesek" <tchesek at epix.net>; "Jim Brown" <harryjbrown at verizon.net>;
><heathkit at mailman.qth.net>
>Sent: Sunday, January 06, 2008 11:27 AM
>Subject: Re: [Heathkit] SB-200/SB-201 Parts Needed
>
>
> > A certain place has a complete input assembly for sale.
> >
> > Carl
> > KM1H
> >
> >
> > ----- Original Message -----
> > From: "Tom Chesek" <tchesek at epix.net>
> > To: "Jim Brown" <harryjbrown at verizon.net>; <heathkit at mailman.qth.net>
> > Sent: Sunday, January 06, 2008 10:54 AM
> > Subject: Re: [Heathkit] SB-200/SB-201 Parts Needed
> >
> >
> > > Hi Jim,
> > >
> > > I had a broken wafer "C" on my SB-201 and I bought a 2 wafer switch on
> > > eBay
> > > a while back from a seller in the Ukraine with the intention of using it
> > > for
> > > this repair. I never got to put it to use because I came across a
>complete
> > > SB-200 bandswitch assembly which I'm in the process now of installing in
> > > my
> > > SB-201.
> > >
> > > Here are the rubs and therefore why I'm posting to the whole reflector
>for
> > > other's input...this wafer is slightly larger than the original. I have
> > > mounted it and it will just fit but with close proximity to the coils.
>It
> > > also does NOT have the shorting contacts on the rear of the wafer. The
> > > rear
> > > wafer contacts appear to short out all of the coils not in use. I don't
> > > know
> > > how much or if any impact this would be on operation. If others think
>that
> > > this is workable and if you don't find an exact replacement I will be
> > > happy
> > > to send you one of my 2 wafers. (I'm keeping one just in case)
> > >
> > > 73,
> > > Tom K3TVC
> > >
> > >
> > > ----- Original Message -----
> > > From: "Jim Brown" <harryjbrown at verizon.net>
> > > To: <heathkit at mailman.qth.net>
> > > Sent: Sunday, January 06, 2008 12:02 AM
> > > Subject: [Heathkit] SB-200/SB-201 Parts Needed
> > >
> > >
> > > Hello,
> > > I am looking for the rear Wafer 'C' that is located at the rear of the
> > > tank coil band switch.  I found out that the rear Wafer was
> > > cracked when I took it out to install a tank coil band switch ass'y.
>This
> > > is
> > > for a Heathkit SB-200.
> > > Let me know if this part is available.
> > > 73 K8WVB Jim
> > >
> > >
> > >
> > > --
> > > No virus found in this incoming message.
> > > Checked by AVG Free Edition.
> > > Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date:
>1/2/2008
> > > 11:29 AM
> > >
> > >
> > >
> >
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 1/2/2008
>11:29 AM
> >
> >