[Heathkit] Calibrating VF-1?

[Randy Perkins]

Thanks Mike. I will check the two resistors. I picked up this VF-1 a 
while back at a hamfest and it is very clean and looks to be put 
together very well. Possibly it has not been used in many years. One 
thing I noticed is that the 160 meter coil looks to have some turns 
removed near the end of the coil. Possibly someone knows exactly how 
many turns and what size if wire should be on this coil.

Thanks, Randy, W5KCM

Michael Waldrop wrote:
> You might want to perform the voltage checks on page 18 of the manual. I also
> recommend checking the two grid leak resistors, 2.2K and 22K. The VF-1 is quite
> old and with age resistors can and will change values which will affect the oscillator.
> 
> 73
> Mike
> W5RKL
> 
> 
> --- On Sun, 8/10/08, Bob Macklin <macklinbob at msn.com> wrote:
> From: Bob Macklin <macklinbob at msn.com>
> Subject: Re: [Heathkit] Calibrating VF-1?
> To: "Kevin Ward" <n2ie at arrl.net>
> Cc: heathkit at mailman.qth.net
> Date: Sunday, August 10, 2008, 9:50 PM
> 
> Does it jump as you are changing the position of the main tuning capacitor
> or as you are adjusting the coil?
> 
> If the coil is all the way to the max inductance you may have an bad or
> unsoldered capacitor.
> 
> One thing to do is unscrew any solder lugs associated with the tuning
> elements and retighten them.
> 
> Bob Macklin
> K5MYJ
> Seattle, Wa,
> "Real Radios Glow in the Dark"
> ----- Original Message ----- 
> From: "Kevin Ward" <n2ie at arrl.net>
> To: "Bob Macklin" <macklinbob at msn.com>
> Cc: "Randy Perkins" <w5kcm at sbcglobal.net>;
> <heathkit at mailman.qth.net>
> Sent: Sunday, August 10, 2008 7:21 PM
> Subject: Re: [Heathkit] Calibrating VF-1?
> 
> 
>> Randy -
>>
>> I agree with Bob - look closely at the main tuning capacitor,
>> particularly the rotor wipers.  As to the drive issue; look in the AT-1
>> manual.  IIRC, there is a circuit change for the crystal oscillator to
>> kill the feedback and make it behave as a buffer.
>>
>> Kevin  N2IE
>>
>>
> 
> 
> 
> 
>       
>